Panasonic PT-EX12KE User Manual

Attaching the lens

26 - ENGLISH

Getting Started

Attaching the lens

Attention

■

The attachment procedure and parts vary depending on the optional lens. Check the product No. and attach

the lens properly.

■

When using ET-ELW02, ET-ELS02, ET-ELS03, ET-ELT02, or ET-ELM01, tie up the cables using the cable

ties supplied with the projector before attaching the lens. If you attach the lens without tying up the cables, the

cables may contact the internal parts, causing malfunctions.

1) Install the lens attachment to the lens.

(i) Remove the lens covers on the front and rear

of the lens, install the lens attachment, and

secure with four screws supplied with the lens.

Focus lock screw

Lens attachment

Screwdriver supplied

with the lens

Locate the motor on the right side.

(ii) Connect the lens motor lead connector to the

socket on the top right of the lens attachment

(the motor driven lens only).

Lens attachment

Socket

Connector

Lens motor lead

2) Set the projector to the standby mode,

press the

side of the main power

switch to turn off the power, and then

unplug the power cord from the outlet.

3) Turn the lens hood counterclockwise

to remove.

Lens hood

4) Remove two screws A, loosen

two screws B, and slide the lens

attachment cover forward to take off.

Lens attachment cover

5) Remove the cover plate.

Cover plate