Panasonic PT-DW8300E User Manual

Do not drop the remote control.

 

z

Avoid contact with liquids or moisture.

 

z

Do not attempt to modify or disassemble the remote control.

 

z

Do not let strong light shine onto the signal receptor. The remote control may malfunction under strong light such as 

 

z

fluorescent.

The remote control can be used within a distance of about 30

 

z

 

m if pointed directly at the remote control receiver. The 

remote control can control at angles of up to ± 15 °C vertically and ± 30 °C horizontally, but the effective control range may 

be reduced.

If there are any obstacles between the remote control and the remote control signal receptor, the remote control may not 

 

z

operate correctly.

The signal will be reflected off the screen. The operating range may differ due to the screen material.

When the projector receives a signal from the remote control, the Power indicator will flash.

 

z

J

J

Press the tab and 

lift up the cover.

Insert the batteries according to 

the polarity diagram indicated 

inside. (insert the   side first).

Remove the batteries in the 

reverse order to setting.

J

Remote control wired terminal 

Remote control signal emitters

Specifies the ID of the remote control.

Restores the default factory setting.

Assign the frequently use functions 

from options for shortcut.

These buttons are used together with 

▲▼◄► to adjust focus, zoom and 

shift by the projection lens.

Switches the image aspect ratio.

Pressing this button toggles the 

projector’s internal mechanical shutter 

to black out the projector.

Pressing this button while projecting 

an image automatically corrects the 

picture positioning on the screen. 

While the auto setup feature is active, 

a message “PROGRESS” appears on 

Returns to the standby mode.

Makes the remote control available 

to control any ID projectors.

Displays projector information.

Enter ID number of the remote 

control and adjustment values of 

menu items.

Displays the test pattern.

Displays and clears the on 

screen indications.

Displays and clears the main menu, and 

returns to the previous menu when the 

menu is displayed.

Navigate through the menu items with 

▲▼◄►, and activate them with the 

These buttons select the RGB1, 

RGB2, DVI-D, VIDEO, S-VIDEO 

Starts the projection while in the 

standby mode.

Remote control indicator

Flashes by pressing any 

buttons.