Panasonic PT-DW8300E User Manual
34
- ENGLISH
Getting Started
Connections
Before connection to the projector
Read carefully the instruction manual for the device to be connected.
z
Turning off the power switch of the devices before connecting cables.
z
If any connection cable is not supplied with the device, or if no optional cable is available for connection of the
z
device, prepare a necessary system connection cable to suit the device.
Video signals containing too much jitter may cause the images on the screen to randomly wobble or wafture.
z
In this case, a time base corrector (TBC) must be connected.
The projector accepts the following signals: VIDEO, S-VIDEO, analogue-RGB (with TTL sync. Level) and
z
digital signal.
Some computer models are not compatible with the projector.
z
When using long cables to connect with each of equipment to the projector, there is a possibility that the image
z
will not be output correctly unless a compensator is used.
J
Pin assignments and signal names of <S-VIDEO IN> terminal
Outside view
Pin No.
Signal names
GND (luminance signal)
GND (color signal)
Luminance signal
Color signal
GND (color signal)
Luminance signal
Color signal
J
Pin assignments and signal names of <RGB2 IN> terminal
Outside view
Pin No.
Signal names
, : Not assigned
- , , : GND terminals
R/P
R
G/G SYNC/Y
B/P
B/P
B
DDC data
HD/SYNC
VD
DDC clock
HD/SYNC
VD
DDC clock
J
Pin assignments and signal names of <HDMI IN> terminal
Outside view
Pin No.
Signal names
Pin No.
Signal names
T.M.D.S data 2+
T.M.D.S data 2 shield
T.M.D.S data 2-
T.M.D.S data 1+
T.M.D.S data 1 shield
T.M.D.S data 1-
T.M.D.S data 0+
T.M.D.S data 0 shield
T.M.D.S data 0-
T.M.D.S clock +
T.M.D.S clock shield
T.M.D.S clock -
CEC
—
SCL
SDA
DDC/CEC GND
+5V
Hot plug detection
Even-numbered pins to
Odd-numbered pins to