Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. PT-DW8300E
  5. User Manual

Panasonic PT-DW8300E User Manual

Download
Page of 129
PICTURE menu
54
 - ENGLISH
Settings
COLOR TEMPERATURE
You can adjust the white balance of the projected 
image.
Press ▲▼ to select [COLOR 
1 ) 
TEMPERATURE].
Press ◄► or <ENTER> button.
2 ) 
The [COLOR TEMPERATURE] individual 
 
z
adjustment screen will be displayed.
Press ◄► to switch [COLOR 
3 ) 
TEMPERATURE].
The setting will change as follows each time 
 
z
◄► is pressed.
DEFAULT 
Û
USER1
USER2
9300K
3200K
[DEFAULT] cannot be selected when the 
: 
Û
[PICTRUE MODE] has been set to [USER] or 
[DICOM SIM.].
Note
When any setting other than [OFF] has been selected 
 
z
for [COLOR MATCHING] (
TEMPERATURE] setting is fixed to [USER1].
The value of color temperature is for reference only.
 
z
 
J
To further adjust toward the 
desired white balance
Select [USER1] or [USER2] in Step 3).
4 ) 
Press <ENTER> button.
5 ) 
The [COLOR TEMPERATURE] screen will be 
 
z
displayed.
Press ▲▼ to select [WHITE 
6 ) 
BALANCE].
Press <ENTER> button.
7 ) 
The [WHITE BALANCE] screen will be 
 
z
displayed.
Press ▲▼ to select [WHITE 
8 ) 
BALANCE HIGH] or [WHITE 
BALANCE LOW].
Press <ENTER> button.
9 ) 
The [WHITE BALANCE HIGH (or LOW)] 
 
z
screen will be displayed.
Press ▲▼ to select [RED], [GREEN] 
10 ) 
or [BLUE].
Press ◄► to adjust the level.
11 ) 
Item
Operation
Adjustment
Adjustment 
range
RED
Press ►.
Deepens red.
Maximum 
value
HIGH : 255
LOW  : 127
Minimum
value
HIGH : 0
LOW  : 
-127
Default
HIGH : 255
LOW  : 0
Press ◄.
Weakens red.
GREEN
Press ►.
Deepens green.
Press ◄.
Weakens green.
BLUE
Press ►.
Deepens blue.
Press ◄.
Weakens blue.
Note
All colors will not be displayed properly unless adequate 
 
z
adjustment is made. If the adjustment does not look 
suitable, you can press <DEFAULT> button to return the 
setting for the selected item only to the factory default 
setting.
The [COLOR TEMPERATURE] cannot be adjusted 
 
z
project the input signal when adjusting the [COLOR 
TEMPERATURE].
Changing the name of [USER 1] 
 
J
or [USER 2]
Select [USER1] or [USER2] in step 3).
1. 
Press <ENTER> button.
2. 
The [COLOR TEMPERATURE] screen will be 
 
z
displayed.
Press ▲▼ to select [COLOR 
3. 
TEMPERATURE NAME CHANGE].
Press <ENTER> button.
4. 
The [COLOR TEMPERATURE NAME 
 
z
CHANGE] screen will be displayed.
(in units of 100K)
COLOR TEMPERATURE NAME CHANGE