Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. PT-DW8300E
  5. User Manual

Panasonic PT-DW8300E User Manual

Download
Page of 129
DISPLAY OPTION menu
ENGLISH - 
71
Settings
Adjust the light portion of RED.
4 ) 
In [RED] of [WHITE BALANCE HIGH], adjust 
 
z
the 100 % of the white level of the image signal 
to the position corresponding to 100 % on the 
waveform monitor. (
Adjust [GREEN] and [BLUE] in a 
5 ) 
similar manner.
Note
When the DVI-D signal, HDMI signal, or SDI signal is 
 
z
inputted, check that the [DVI SIGNAL LEVEL], [HDMI 
SIGNAL LEVEL], and [SDI SIGNAL LEVEL] are correctly 
set before adjusting the black level.
The keystone cannot be applied to the waveform monitor 
 
z
display.
The waveform monitor cannot be displayed in the [P IN P] 
 
z
mode.
If the [P IN P] mode is set while the waveform is being 
 
z
monitored, the waveform monitor will turn off.
The waveform monitor is not displayed while the on-
 
z
screen display is off.
AUTO SIGNAL
You can turn ON/OFF automatically detecting system 
of the AUTO SETUP feature.
Press ▲▼ to select [AUTO SIGNAL].
1 ) 
Press ◄► to switch [AUTO SIGNAL].
2 ) 
The setting will change as follows each time 
 
z
◄► is pressed.
OFF
ON
OFF
Only when <AUTO SETUP> button 
is pressed, the projected image 
position will be adjusted.
ON
If unregistered signals are input 
when [ON] is selected, auto setup 
will be initiated automatically.
AUTO SETUP
Use this setting when adjusting a specific or oblong 
(16:9, etc.) signal.
Press ▲▼ to select [AUTO SETUP].
1 ) 
Press <ENTER> button.
2 ) 
The [AUTO SETUP] screen will be displayed.
 
z
Press ▲▼ to select [MODE].
3 ) 
Press ◄► to switch [MODE].
4 ) 
The setting will change as follows each time 
 
z
◄► is pressed.
DEFAULT
WIDE
USER
DEFAULT
To receive signals of which image 
aspect is 4:3 or 5:4  
(applicable resolution : 640 × 400,  
640 × 480, 800 × 600, 832 × 624,  
960 × 720, 1 024 × 768,  
1 152 × 864, 1 152 × 870,  
1 280 × 960, 1 280 × 1 024,  
1 600 × 1 200, 1 400 × 1 050)
WIDE
To receive signals of which the 
image aspect is wide  
(applicable resolution: 720 × 400,  
848 × 480, 1 280 × 720,  
1 024 × 600, 1 120 × 750,  
1 440 × 900, 1 680 × 1 050)
USER
To receive signals of specific 
horizontal resolution (number of 
horizontally displayed dots)
If [USER] is selected, press ◄► to 
5 ) 
enter the horizontal resolution of 
signal source into [DISPLAY DOTS].
Press <ENTER> button.
6 ) 
Execute automatic adjustment. A message 
 
z
“PROGRESS...” appears during automatic 
adjustment. When the adjustment is complete, 
the system returns to the input screen.