Panasonic PT-EW630EL User Manual

If a problem occurs within the projector, it will be notified with the temperature indicator <TEMP>, the filter 

indicator <FILTER>, the shutter indicator <SHUTTER*/AV MUTE*>, and the lamp indicator <LAMP>.

Check the status of the indicators and take the following action.

*<SHUTTER> indicator (Only for EZ570 series, EW630 series and EX600 series.)

 <AV MUTE> indicator (Only for EW530 series and EX500 series.)

Before you take a remedial measure, follow the procedure of switching the power off indicated in “Turning off the projector”. 

 

z

(

Æ

page 39)

If multiple indicators light or blink, verify the status of the projector by looking at each indicator.

 

z

Confirm the status of the power indicated on the <ON(G)/STANDBY(R)> indicator.

 

z

J

The status of the indicator is displayed with the following symbols.


: 

Off

, 



: 

On

, 



: 

Flashing

, 

„

: 

Off or On or Flashing

<ON(G)/

STANDBY(R)>

Green/Red/

Orange

<TEMP>

Red

<FILTER> 

Orange

<SHUTTER/

AV MUTE>

Blue

<LAMP>

Orange



//









The power plug has been removed from the 

outlet.



//

„

*

1

„

*

1

„

*

1

„

*

1

The projector is in the standby mode.

Turns on when pressing the <POWER ON> 
button on the remote control or the <

> 

button on the side control.



//

„

*

1

„

*

1

„

*

1

„

*

1

The projector is operating normally.



//



*

2

„

*

1

„

*

1

„

*

1

„

*

1

The lamp is cooling down. The projector does 

not turn on when pressing the <POWER ON> 
button on the remote control or the <

> button 

on the side control until the standby indicator 

<ON(G)/STANDBY(R)> changes to red.



*

2

//

„

*

1

„

*

1

„

*

1

„

*

1

The projector is in the power management 

mode. The lamp will turn on when controlling the 

projector, allowing the user to start operating it.



//



*

2

„

*

1

„

*

1

„

*

1

„

*

1

Power management mode is [On] and the lamp 

is cooling down.



//

„

*

1

„

*

1



„

*

1

The shutter function has been turned on.

Press any button on the remote control or the 

side control to cancel the function.



//

„

*

1

„

*

1



*

2

„

*

1

The projector is in the shutter management 

mode. The lamp will turn on when controlling the 

projector, allowing the user to start operating it.



/



/



*

2

„

*

1

„

*

1



*

2

„

*

1

Shutter management mode is [On] and the lamp 

is cooling down.

*1: The indicator will change according to different conditions, regardless of the status of other indicators.
*2: The indicator will flash in approximately 1-second intervals.