Panasonic PT-D10000 User Manual

Page of 12
S
P
E
C
F
I
L
E
PT-D10000
3-Chip DLP™ Projector
As of November 2008
< 3 >
VIDEO OUT:
S-VIDEO IN:
LAN:
SERIAL IN *
4
:
SERIAL OUT *
4
:
REMOTE 1 IN:
REMOTE 1 OUT:
REMOTE 2 IN:
Optional board slot *
5
:
With ET-MD77SD1 installed: 
SERIAL IN:
SERIAL OUT:
With ET-MD77SD3 installed: 
SERIAL IN:
SERIAL OUT:
With ET-MD77DV installed: 
DVI-D IN:
Power cord:
Cabinet material: 
Dimensions (W x H x D):
Weight*
6
Operating temperature*
7
:
Operating humidity:
BNC x 1, 1.0 Vp-p, active through
Mini DIN 4-pin x 1
Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms (S1 signal compatible)
RJ-45 x 1, 10Base-T/100Base-TX, compatible with PJLink™ (class 1)
D-sub 9-pin (female) x 2, for external control (RS-232C/RS-422 compli-
ant)
D-sub 9-pin (male) x 1, for link control (RS-422 compliant)
M3 jack x 1 for wired remote control
M3 jack x 1 for link control
D-sub 9-pin x 1 for external control (parallel)
BNC x 1, SD-SDI signal (4:2:2), SMPTE 259M compliant, 480i, 576i
BNC x 1, active through
BNC x 1
SD-SDI signal (4:2:2): SMPTE 259M compliant, 480i, 576i
Single-link HD-SDI signal (YP
B
P
R
4:2:2 10-bit): SMPTE 292M compiant,
720/50p, 720/60p, 1080/50i, 1080/60i, 1080/25p, 1080/24p,
1080/24sF, 1080/30p
BNC x 1, active through
DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP, single link
EDID1: 480p, 576p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF,
1080/25p, 1080/30p, 1080/60p, 1080/50p, 720/60p, 720/50p
EDID2: Compatible with non-interlaced signals only,
Effective resolution: VGA (640 x 480) – U-XGA (1,600 x 1,200)
Dot clock: 25–162 MHz
NOTE: LAN terminals on the optional board can not be used. Use the LAN terminal
on the projector.
3 m/9.8´
Moulded plastic
578 x 320 x 643 mm (22-3/4˝ x 12-19/32˝ x 25-5/16˝) (without lens)
Approx. 32 kg (70.5 lbs) (without lens)
0°–45°C (32°–113°F)
10%–80% (no condensation)