Panasonic PT-EX12KU User Manual

Using the remote control

ENGLISH - 47

Basic Operation

Using the remote control

Using the shutter function

You can fully block the projection light.

button

1) Press the <SHUTTER> button on the

remote control.

■

This blocks the projection light. The shutter

indicator <SHUTTER> lights up in blue.

2) Press the <SHUTTER> button again.

■

This opens the shutter and restarts projection.

The shutter indicator <SHUTTER> goes off.

Note

■

The operations of the shutter differ depending on

the settings. Set the operations using [Shutter] in

the [Setting] menu.

■

There is also the <SHUTTER> button on the control

panel.

■

If an error message appears when you press the

<SHUTTER> button, the button lock is enabled.

Check the [Shutter] setting from the [Setting] menu.

Using the freeze function

You can temporarily freeze the projected image

regardless of the state of playback in an external

device.

button

1) Press the <FREEZE> button on the

remote control.

■

This freezes the image.

2) Press the button on the remote control

or the control panel.

■

Releases the frozen image.

Switching the input signal

You can switch the input signal for projection.

button

1) Press the <INPUT 1> - <INPUT 4>

buttons on the remote control.

■

Each press of the button changes input signal.

■

The <INPUT 3> button and the <INPUT 4>

button are enabled only when an input module

is inserted.

<INPUT 1> button

<INPUT 2> button

[RGB(PC analog)]

[RGB]

[RGB(Scart)]

[Y, Pb/Cb, Pr/Cr]

[RGB(PC digital)]

[Video]

[RGB(AV HDCP)]

[S-video]

[HDMI]