Panasonic PT-CW240E User Manual

ENGLISH - 

25

Read carefully the instruction manual for the device to be connected.

 

z

Turn off the power switch of the devices before connecting cables.

 

z

If any connection cable is not supplied with the device, or if no optional cable is available for connection of the 

 

z

device, prepare a necessary system connection cable to suit the device.

Video signals containing too much jitter may cause the images on the screen to randomly wobble or wafture.  

 

z

In this case, a time base corrector (TBC) must be connected.

The projector accepts the following signals: VIDEO, S-VIDEO, analogue-RGB (with TTL sync. Level) and 

 

z

digital signal.

Some computer models are not compatible with the projector.

 

z

When using long cables to connect with each of equipment to the projector, there is a possibility that the image 

 

z

will not be output correctly unless a compensator is used.

For details on what video signals the projector supports, see “List of compatible signals”. (

 

z

Æ

pages 68-69)

When connecting with a video deck, be sure to use the one with a built-in time base corrector (TBC) or use a TBC between 

 

z

the projector and the video deck.

If nonstandard burst signals are connected, the image may be distorted. If this is the case, connect a TBC between the 

 

z

projector and the video deck.

Use an HDMI cable that conforms to HDMI standards such as an HDMI High Speed cable. If a cable that does not meet 

 

z

HDMI standards is used, video may be interrupted or may not be displayed.  

When connecting the 1080p signal using HDMI, use a cable compliant with 1080p signal.

This projector does not support the VIERA Link (HDMI).

 

z