Panasonic PT-CW240E User Manual

ENGLISH - 

39

Shift the projected image position vertically.

During Computer input signal, [V Position] can be 

 

z

adjusted.

Adjust the magnification of the image. Magnification 

can be set from 1.0x to 2.0x in 0.1 increments.

When the [Digital Zoom] is in the enlarge status, exits the 

 

z

menu screen and the [Zoom] picture will display at the 

bottom left of the screen. This indicates the zoom 

function is in use. 

Under the enlarge status, press ▲▼◄► to move the 

 

z

enlarged image.

If the input signal is changed under the enlarge status, 

 

z

the magnification of [Digital Zoom] will be reset.

This function is used to adjust keystone distortion of 

the projected image.

Use the <KEYSTONE+/-> (▲▼) buttons on the 

 

z

remote control to adjust. 

Press the ▲► on 

the remote  control 

or the ► on the 

control panel to 

adjust the upper of 

the keystone.

Press the 

▼◄ on 

the remote  control 

or the 

◄ on the 

control panel to 

adjust the bottom of 

the keystone.

The adjusted keystone distortion will store automatically 

 

z

even when the signal is interrupted or the AC power cord 

is plugged out or turned off the projector.

When the larger amount of keystone correction, the 

 

z

picture quality will degrade and it will get harder to focus 

with more correction. Set the projector so the correction 

will be as small as possible.

When keystone correction is performed, the screen size 

 

z

will also change.

Part of Closed caption may not be displayed when high 

 

z

compensation values are set in [V Keystone].

This function is used to project the image from a 

ceiling-mounted projector.

When setting on a desk/floor and 

projecting from forward.

When mounting on the ceiling and 

projecting forward.

When setting on a desk/floor and 

projecting rear (Using translucent 

screen).

When mounting on the ceiling and 

projecting from rear (Using translucent 

screen).