Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. PT-CW240E
  5. User Manual

Panasonic PT-CW240E User Manual

Download
Page of 74
Options
44
 - ENGLISH
Settings
Lamp Power Mode
 
J
Selects desired lamp power mode under 
 
z
different situations.
Press ▲▼ to select [Lamp Power Mode].
1 ) 
Press ► to display the setting dialog box.
2 ) 
Press ◄► to select the desired item.
3 ) 
Normal
Normal brightness.
ECO
Lower brightness reduces the lamp 
power consumption and extends 
the lamp life.
Note
When set to [ECO], you can extend the power savings, 
 
z
reduced operating noise, the service life of the lamp.
When there is no signal for more than 5 minutes, the 
 
z
lamp power will be decreased automatically for power 
saving.
Clear Lamp Hours
 
J
Reset the lamp usage time after replacing the 
 
z
lamp unit. 
Press ▲▼ to select [Clear Lamp Hours].
1 ) 
Press ► to display the setting dialog box.
2 ) 
Press 
3 ) 
▲▼ to switch [Yes]/[No]. 
Press ► to execute.
4 ) 
Dynamic Black
Use this function to emphasizes detail of dark areas 
of the image. 
Press ▲▼ to select [Dynamic Black].
1 ) 
Press ► to display the setting dialog box.
2 ) 
Press ◄► to switch [On]/[Off].
3 ) 
On
Emphasizes detail of dark areas of 
the image.
Off
Displays with normal quality.
Note
[Dynamic Black] will be gray out and can not be operated 
 
z
when [Picture mode] is set to other mode except [Movie]. 
High Altitude
Set to [On] when the projector is used at elevation 
approx. 1 000 m (3 300 ft) and approx. 3 000 m  
(10 000 ft).
Press ▲▼ to select [High Altitude].
1 ) 
Press ► to display the adjustment 
2 ) 
dialog box.
Press ◄► to switch [On]/[Off].
3 ) 
On
For the elevation approx. 1 000 m  
(3 300 ft) and approx. 3 000 m  
(10 000 ft).
Off
For the elevation below approx.  
1 000 m (3 300 ft).
Note
When [On] is selected, the speed and the noise of the 
 
z
fan will increase.
Dust Filter Reminder 
Set the cleaning cycle of the filters and reset the use 
time of the filters.
Press ▲▼ to select [Dust Filter 
1 ) 
Reminder].
Press ► to display the setting dialog box. 
2 ) 
Filters Remind (Hour)
 
J
Set the timer to display the Dust Filter Reminder 
 
z
message (
Æ
page 55).
Press ▲▼ to select [Filter Remind].
1 ) 
Press ► to display the adjustment 
2 ) 
dialog box.
Press ◄► to set the time.
3 ) 
The factory default is 0 hour.
 
z
You can set the time in 50 hours intervals and 
 
z
the longest set time is 1000 hours.
Cleaning up Reminder
 
J
Reset the air filter used time to zero.
 
z
Reset the air filter hour counter after cleaning 
 
z
or replacing the dust filter. 
Press ▲▼ to select [Cleaning up 
1 ) 
Reminder].
Press ► to display the setting dialog box.
2 ) 
Press ▲▼ to switch [Yes]/[No].
3 ) 
Press ► to execute.
4 ) 
Note
It is recommended to clean the air filters regularly every 
 
z
500 hours of usage.
Information
Displays the input signal source and setting state 
information of the projector.
Press ▲▼ to select [Information].
1 ) 
Press ► to display the information 
2 ) 
dialog box.
Displays [Model Name], [Source], [Resolution], 
 
z
[Software Version], [Color Space] and [Aspect 
Ratio].