Panasonic PT-LB10E User Manual

This adjusts the contrast of the
picture. (Adjust the “BRIGHT”
setting first if required before
adjusting the “CONTRAST” setting.)
The picture is bright:  I button
The picture is dark: 

H button

This adjusts the darker areas (black
areas) in the picture.
Black areas are too light:  I button
Dark areas are too solid:  H button

(S-VIDEO/VIDEO/YP

B

P

R

only)

The colour is too deep:  I button
The colour is too pale:  H button

(NTSC/NTSC 4.43/YP

B

P

R

only)

This adjusts the flesh tones in the
picture.
The flesh tones are greenish: 
I button
The flesh tones are reddish: 
H button

To soften the picture details: 
I button
To sharpen the picture details: 
H button

This is used to adjust the white
areas of the picture if they appear
bluish or reddish.

(RGB only)
This is used to adjust the white
areas of the picture if they appear
colourised. 
To make the selected colour lighter:
I button 
To make the selected colour stronger:
H button

ON
The lamp is controlled according to
the input signals to project images
with the best quality.
OFF
“AI” is disabled.

C O L O R   T E M P .     S T A N D A R D

                                [

                              H I G H

                                [

                              L O W

NOTE:
B “AI” is disabled when “LAMP

POWER” is set to “LOW”.
(Refer to page 45.)