Panasonic PT-LB51U User Manual

When the input signal is changed, the input signal 
information will be displayed in the upper right corner of 
the projected images. You can select the level of the 
input signal information.

You can switch the logo on/off that is displayed when 
starting up the projector. Press I H to select the 
required option.

 

Active

 

Deactive

You can assign frequently-used operations to the 
FUNCTION button on the projector and use it as a 
convenient shortcut button. The functions which can be 
set are “SHUTTER”, “AUTO SETUP”, “PICTURE 
MODE”, “FREEZE” and “INDEX WINDOW”.
Use I H to select the function to assign to the 
FUNCTION button.

You can switch the function of the COMPUTER2 IN/
1 OUT terminal.

 

 

This setting changes the lamp brightness. When set to 
“ECO-MODE”, the luminance of the lamp is reduced, but 
the projector uses less power, and the operating noise is 
also reduced. This can help to extend the lamp’s 
operating life. If using the projector in small rooms where 
high luminance is not required, it is recommended that 
you set the “LAMP POWER” to “ECO-MODE”.

 

Normal mode

 

ECO mode

The input signal information will not 
be displayed.

Only the name of the input signal will 
be displayed.

The input signal information will be 
displayed in detail.

• If “INPUT GUIDE” is set to “DETAILED”, the guide 

screen for computer connection will be displayed when 
COMPUTER1 or COMPUTER2 is selected and no 
signal is being input to the COMPUTER1 IN or 
COMPUTER2 IN connector. If you would like the guide 
screen not to be displayed, set “INPUT GUIDE” to 
“SIMPLE” or “OFF”.

 

 

Operates the shutter function
See “SHUTTER” on page 36

Starts the automatic position 
correction function
See “AUTO SETUP” on 
page 35

Switches the picture mode
See “PICTURE MODE” on 
page 30.

Operates the freeze function
See “Capturing an image” on 
page 24

Operates the INDEX-
WINDOW function
See “INDEX-WINDOW” on 
page 36

• “LAMP POWER” cannot be set when no signal is being 

input.