Panasonic PT-LW25HU User Manual

(Insert the – side first.)

Remove the batteries in the reverse order of 

 

z

installation. 

When you use the system with multiple projectors, you can operate all the projectors simultaneously or each 

projector individually using single remote control, if unique ID number is assigned to each projector.

After setting the ID number of the projector, set the same ID number to the remote control.

There are 7 different ID codes (ALL, Code 1~Code 6), the initial ID number is [ALL].

J

  1) While holding down the <MENU> button, press the <IMAGE> button. The number of times you press the 

      <IMAGE> button corresponds to the desired ID code number.

  2) The number of times to press the <IMAGE> button is as follows: 

      Code 1= Once, Code 2= Twice, Code 3= 3 times, Code 4= 4 times

      Code 5= 5 times, Code 6= 6 times

  3) The ID code is changed when the <MENU> button is released.

  4) The ID code is reset to [ALL] (default) by pressing the <MENU> button and <IMAGE> button at the same 

      time for 5 seconds or more.

If the <IMAGE> button is pressed 7 times or more, the ID code                                                                                           

 

z

cannot be changed (the operation is invalid).

The status of the ID code is not stored after replacing batteries.

 

z

MENU button

IMAGE button