Panasonic PT-LW25HU User Manual
Powering ON/OFF
ENGLISH -
29
Basic Operation
Complete peripheral connections (with a
1 )
computer, VCR, etc.) before turning on the
projector.
Connect the projector’s AC power cord into an
Connect the projector’s AC power cord into an
2 )
AC outlet. The <STANDBY(R)/ON(G)> indicator
lights red. Open the lens cap.
Press the
Press the
3 )
<
> button on the control panel or
the remote control. The <STANDBY(R)/ON(G)>
indicator lights green and the cooling fans start
to operate. The preparation display appears on
the screen and the count down starts.
After the countdown, the input source that was
After the countdown, the input source that was
4 )
selected the last time and the lamp power status
icon appear on the screen.
If there is no signal input when start on the
If there is no signal input when start on the
5 )
projector, or the current signal is missed while
operating the projector, the Video/Computer
selection window will be displayed on the
screen, please move the pointer to input source
desired by pressing the Press ▲▼ and press
the <SELECT> button. And then follow the input
signal guidance window to correct the signal and
connection.
If the projector is locked with a PIN code, PIN
code input dialog box will appear. Enter the PIN
code as instructed on the next page.
Note
When the [Logo select] function is set to [Off ], the logo
z
will not be shown on the screen (
Æ
page 53).
When [Countdown off ] or [Off ] is selected in the [Display]
z
function, the preparation display will not be shown on the
screen (
Æ
page 53).
When the [Input search] function is set to [On 2], the
z
input signal will be searched automatically (
Æ
page 52).
When the [Direct on] function is set to [On], the projector
z
will be turned on automatically by connecting the AC
power cord to an AC outlet.
Turning On the Projector
(2)
(3)
(3)
Video/Computer selection
06
Selected Input Source and Lamp power
Lamp power status
The preparation display will disappear
after 30 seconds
.