Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. PT-LW25HU
  5. User Manual

Panasonic PT-LW25HU User Manual

Download
Page of 78
ENGLISH - 
39
Settings
Input menu
Select [Input] from the Main Menu (see 
“Navigating through the menu” on page 36), 
then select the item from the sub-menu.
Remote Control
Control Panel
 
Computer 1: RGB/Component 
/RGB (Scart)/S-video 
Press ▲▼ to select [Computer 1]. 
1 ) 
Press ► to access the submenu.
2 ) 
Press ▲▼ to select [RGB], 
3 ) 
[Component], [RGB(Scart)] or 
[S-video].
Press the <SELECT> button.
4 ) 
When [Computer 1] is selected, [Component], 
 
z
[RGB(Scart)] or [S-video] can be available. 
Computer 2: RGB
Press ▲▼ to select [Computer 2 (RGB)] 
and then press the <SELECT> button. 
 
J
Computer System Selection
This projector automatically tunes to various types of 
computers with its Multi-scan system and [Auto PC 
Adjustment]. If a computer is selected as a signal 
source, this projector automatically detects the signal 
format and tunes to project a proper image without 
any additional settings. (Signal formats provided in 
this projector are shown on pages 71-73.)
 
   
   When the projector can not recognize the 
                connected signal conforming to the 
                provided PC Systems, 
Auto is displayed  
                on the System Menu box and the Auto PC  
               adjustment function works to display proper  
                images.  If the image is not projected    
                properly, a manual adjustment is required.
                There is no signal input from the computer.                                                                                                                                        
                Check the connection between your                                                                                                                                             
                computer and the projector.
                The preset system is manually adjusted in 
                the [PC adjust] Menu. The adjusted data 
                can be stored in
 Mode 1-10. 
                PC Systems provided in this projector                                                                                                                                        
                is chosen. The projector chooses a proper                                                                                                                                           
                system provided in the projector and                                                                                                                                              
                displays it.
* Mode 1 and SVGA 1 are examples.  
Press ▲▼ to select [System].
1 ) 
Press ► or the <SELECT> button to 
2 ) 
access the submenu.
Press ▲▼ to select the desired system.
3 ) 
Video
Press ▲▼ to select [Video] and then 
press the <SELECT> button.
 
J
Video System Selection
Video or S-video
Auto
The projector automatically detects an incoming video 
system, and adjusts itself to optimize its performance.
When [Video System] is [PAL-M] or [PAL-N], select 
the system manually.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
If the projector cannot reproduce proper video image, 
select a specific broadcast signal format from among 
[PAL], [SECAM], [NTSC], [NTSC 4.43], [PAL-M] and 
[PAL-N].
AUTO
- - - -
Mode 1
SVGA 1