Panasonic PT-FW300E User Manual

• Do not drop the remote control.
• Avoid contact with liquids or moisture.
• Use manganese batteries or alkaline batteries with the remote control.
• Do not attempt to modify or disassemble the remote control. Contact an Authorised Service Centre for repairs.
• Do not keep pressing the remote control buttons as this may shorten battery life.
• Do not point the laser in other people’s eyes or stare into beam.
• See “Remote control operation” on page 27.

Power button
While the MAIN POWER is 
on, switch between standby 
mode and projection mode. 
(page 23)

Project a laser pointer. 
(page 31)

Display the main menu. 
(page 34)

Navigate through the 
menus with FGIH, and 
activate the menu item 
with the ENTER button. 
(page 34)

Capture the projected image 
as a frozen picture. 
(page 29)

Reset some of the settings 
to the factory default 
settings. (page 29)

Assign the frequently use 
functions from the options 
for shortcut. (page 30)

Control to change the scale 
by means of digital zoom. 
(page 28)

Automatically adjust the 
setting of SHIFT, DOT 
CLOCK, CLOCK PHASE 
and SIGNAL SEARCH for 

the projected image of COMPUTER/
DVI signal. (page 27)

Switch the required input 
signal button to select.

Return to the previous menu. 
(page 34)

Turn off the projection 
temporarily. (page 29)

Display the frozen image 
while the display of 
subsequent images 

continues. (page 29)

Display 2 different source 
images at a time. 
(page 29)

Control to adjust the volume 
of the speaker. (page 31)

These buttons are for network control. See the contents of the 
provided CD-ROM for instructions. The COMPUTER 
SEARCH button is for PT-FW300NTE only.

Battery compartment
1. Press the tab and lift up the cover.
2. Insert the batteries according to the polarity diagram 

indicated inside.

Attaching a hand strap
You can attach a 
favourite strap on to the 
remote control.

Remote control signal 
emitters (page 27)

Laser pointer beam 
emitter (page 31)

Remote control indicator
Pressing any button except the LASER 
button, the remote control indicator will 
flash. Pressing the LASER button, it will 
lit.

(Shown as PT-FW300NTE)