Panasonic D6KE User Manual

 Switching off the projector

1. Press the POWER STANDBY button.



The confirmation screen will be displayed.

2. Select OK and press the ENTER button, or press the 

 button again.



The projection of the image stops, and the power indicator 
of the projector lights up orange. The cooling fan keeps 
running.

3. When the power indicator of the projector turns to red, 

switch the POWER switch to OFF.



When the power indicator of the projector turns to red, the 
cooling fan stops.



While the cooling fan is still running, never turn off the 
POWER

 switch, nor unplug the mains lead from the mains 

socket.

 Direct power off function

The power supplied internally causes the cooling fan to 
continue operating and cool off in the event that the 
power has failed or even after the mains lead is 
accidentally disconnected immediately after the power 
has been turned off.

 Lens home position

1. Press and hold the LENS button of the control button on 

the projector or SHIFT button of the remote control for 
3 seconds or more.



The HOME POSITION setup screen will be displayed for 
5 seconds.

2. Press the ENTER button before the setup screen 

disappeared.



While the lens returning to the home position, a message 
“PROGRESS” appears on the screen.

 Adjustment range after lens 

Do not move the lens beyond the bounds of the shift 
range as this may cause a change in the focus. This 
limitation is to protect the parts of the projector. Using the 
standard projection position as the reference, the optical 
axis shift function makes it possible to adjust the 
projection position in the ranges shown in the figures 
below.

• In the cooling state after the power is turned off, the lamp will 

not light up even if the power is turned on. To light up the lamp, 
turn on the power supply again when the lamp has been 
cooled sufficiently. Failure to observe this may shorten the 
lamp life.

• When the lamp has been cooled by the direct power off 

function, it sometimes takes longer than usual for the lamp to 
light up again.

• While the cooling fan is operating, do not place the projector 

inside a box or bag.

 button

• The home position for the projection lens is the lens position 

when the lens is being replaced or when the projector is being 
stored away, and it is not the optical centre of the screen.

 PT-DZ6710E/PT-DZ6700E/PT-D6000E/

 PT-DW6300E

Standard projection position

Standard projection position