Panasonic PT-AE200U User Manual

(4:3 aspect mode only)

This sets the horizontal positioning
of the projected image when the 4:3
aspect ratio is selected. (Refer to
page 31.)

This setting should be changed in
accordance with the projector
setting-up method.
Set to “FRONT” when using a
normal reflective screen with the
projector positioned in front of the
screen, and set to “REAR” when
using a translucent screen with the
projector positioned behind the
screen.

This setting should be changed in
accordance with the projector
setting-up method.
Set to “DESK” when setting up the
projector on a desk or similar, and
set to “CEILING” when suspending
the projector from the ceiling using
the ceiling bracket which is sold
separately.

If using of this projector at high

D E S K / C E I L I N G       D E S K

                                [

                          C E I L I N G

elevations (above 1 400 m), set
FAN CONTROL to “HIGH”.

This setting changes the lamp
brightness. When set to “LOW”, the
luminance of the lamp is reduced,
but the projector uses less power,
and the operating noise is also
reduced. 
The LOW position is recommended
for narrow rooms where a high
picture luminance is not essential or
for watching movies.

This setting displays the usage time
for the lamp unit which is currently
being used. 

NOTE:
B The lamp’s operating life varies

depending on the usage
conditions (such as the LAMP
POWER setting and the number
of times the power is turned on
and off). 

L A M P   P O W E R           H I G H

                                [

                              L O W

F R O N T / R E A R         F R O N T

                                [

                              R E A R

F A N   C O N T R O L       N O R M A L

  

                                [

                              H I G H

The SD memory card is a semiconductor memory which at 24 mm x 32 mm
x 2.1 mm is about the size of a postage stamp. It is a next-generation
recording medium which can be used instead of conventional storage
devices such as MDs (mini discs), CDs (compact discs) and cassette tapes.
In addition, it allows data to be repeatedly recorded, played and erased. The
projector can be used to play computer image files, video images (still
pictures) and moving pictures using the SD memory card.

Still image data
B DCF compliant still image data (See page 64 for details on DCF

compliance.)

Moving image data
B MPEG4 movie data (audio: G.726 compliant)

However, only files in ASF format can be played back.

Do not turn off the projector’s power or remove an SD memory card from the
projector while the SD memory card is in use (while the access indicator is
flashing). (See page 42.) If this is not observed, corruption of the data on the
SD memory card may occur.

Still image data

Moving image data

Record:

Still image data

Moving image data

Play back:

Digital

camera

Computer

4 : 3   H - P O S           C E N T E R

                                [

                            R I G H T

                                [

                              L E F T