Panasonic PT-AE3000E User Manual
Getting Started
Setting up
E
NGLISH - 15
You can use the projector with any of the following 4 projection methods. To set the desired method in the projector,
See “INSTALLATION” on page 44.
See “INSTALLATION” on page 44.
You can screw up/down the front leg adjusters to control the angle of the projector for adjusting the throwing angle.
See “Positioning the image” on page 22.
See “Positioning the image” on page 22.
Projection method
J
Setting on a desk/floor and
projecting from front
projecting from front
J
Setting on a desk/floor and
projecting from rear
projecting from rear
INSTALLATION: FRONT/DESK
INSTALLATION: REAR/DESK
J
Mounting on the ceiling and
projecting from front
projecting from front
J
Mounting on the ceiling and
projecting from rear
projecting from rear
INSTALLATION: FRONT/CEILING
INSTALLATION: REAR/CEILING
NOTE:
• A translucent screen is required for rear projection.
• When mounting the projector on the ceiling, the optional ceiling mount bracket (ET-PKE2000, ET-PKE1000S) is required.
• See “Ceiling mount bracket safeguards” on page 56.
• When mounting the projector on the ceiling, the optional ceiling mount bracket (ET-PKE2000, ET-PKE1000S) is required.
• See “Ceiling mount bracket safeguards” on page 56.
Front leg adjusters and throwing angle
NOTE:
• Heated air comes out of the air exhaust port. Do not touch the air exhaust port directly.
• If keystone distortion occurs, see “KEYSTONE” on page 39.
• Screw up the front leg adjusters, and an audible click will be heard as the limit.
• If keystone distortion occurs, see “KEYSTONE” on page 39.
• Screw up the front leg adjusters, and an audible click will be heard as the limit.