Panasonic PT-AE3000E User Manual

You can reset most of the customised settings 
to the factory defaults by pressing DEFAULT 
button of the remote control. Display the 
required sub-menu or the menu items and 
press the button again.

Press the FREEZE button to capture the 
image, and you can see it as a still picture while 
the AV equipment are continuing. Press the 
FREEZE button again to escape and return to 
the continuing image.

While displaying the frozen image, you can enter the 
AREA SELECT mode of the SPLIT ADJUST menu by 
pressing the ENTER button. See “SPLIT ADJUST” on 
page 33.

You can switch the input method manually 
by pressing the INPUT SELECT button. 
Press the button several times or press I 
H to cycle through the input methods as 
follows. The actual projected image will be 
changed in a while.

 

The graphical guidance will be displayed on the upper 
right of the projected image and you can confirm the 
selected input method which is highlighted in yellow. See 
“INPUT GUIDE” on page 43.

You can access the assigned function in FUNCTION BUTTON menu as shortcut. See “FUNCTION BUTTON” on 
page 42.

• Some menu items are not available to reset by pressing 

the DEFAULT button. Adjust each menu item manually.

COMPONENT (YP

B

P

R

) signals 

from the equipment connected to 
COMPONENT IN 1/
COMPONENT IN 2.

S-VIDEO signal from the equipment 
connected to S-VIDEO IN.

VIDEO signal from the equipment 
connected to VIDEO IN.

HDMI signal from the equipment 
connected to HDMI IN 1/HDMI IN 2/
HDMI IN 3.

COMPUTER (RGB) signal from the 
equipment connected to 
COMPUTER IN.

• If you select an unplugged input method, the guidance 

will blink on and off several times.

• See “List of compatible signals” on page 50.
• See “Connections” on page 18.