Panasonic PT-AE3000E User Manual

WSS (Wide Screen Signalling) detects if a PAL/
625p (576p)/625i (576i) signal is input and that signal 
has an identification signal, and switch the aspect ratio 
to required setting automatically. You can switch the 
system off manually.

If the 4 edges of an image is partly dropped, you can use 
this function to adjust and project it properly.

 

Setting range: 0 to +10

 

OVER SCAN is not available with COMPUTER 
signals.

If the projector is aligned non-perpendicularly to the 
screen, or if the projection screen has an angled surface, 
you can correct the keystone vertically.

 

Setting range: -32 to 32

You can adjust V - POSITION, H - POSITION, DOT 
CLOCK and CLOCK PHASE automatically when 
connecting via COMPUTER IN. Press ENTER to adjust 
these at the same time.

• You can correct the distortion ± 30 degrees from the 

vertical plane. For a better quality image, installing the 
projector with minimum distortion is recommended.

• Some distortion may be retained for the lens shift 

adjustment.

• The distortion of the main menu screen is not 

correctable.

• The result of the keystone correction will affect the 

aspect ratio and the size of the image.