Panasonic ET-DFD75 Leaflet

1

This mount bracket is to be used when stacking two DLP™-based projectors.   

Dimensions (W x H x D): 

650 x 589 x 680 mm  (25-9/16˝ x 23-3/16˝ x 26-3/4˝)

Weight:

27 kg (59.5 lbs)

Weights and dimensions shown are approximate. Specifications subject to change without notice.

Digital Light Processing and DLP are trademarks of Texas Instruments.

Base frame  . . . . . . . . . . . . . . . . . . . . .1
Guard frame  . . . . . . . . . . . . . . . . . . . .2
Cable guide fitting  . . . . . . . . . . . . . . . .2
Washer-fitted screws (M4 x 8)  . . . . . .20
Spacers . . . . . . . . . . . . . . . . . . . . . . .10
Set mounting base A  . . . . . . . . . . . . . .1
Set mounting base B  . . . . . . . . . . . . . .1
Screws (M6)  . . . . . . . . . . . . . . . . . . .10
Hex nuts (M8)  . . . . . . . . . . . . . . . . . . .8
Flat washers (M8)  . . . . . . . . . . . . . . . .8

Spring washers (M8)  . . . . . . . . . . . . . .8
Allen hex socket bolts (M8)  . . . . . . . . .4
Mounting nuts A (M8) . . . . . . . . . . . . . .4
Adjustment bolts (M8)  . . . . . . . . . . . . .4
Flat washers A  . . . . . . . . . . . . . . . . . .4
Flat washers B  . . . . . . . . . . . . . . . . . .4
Mounting nuts B (M8) . . . . . . . . . . . . . .4
Flat washers (M4)  . . . . . . . . . . . . . . . .4
Spring washers (M4)  . . . . . . . . . . . . . .4
Hex nuts (M4)  . . . . . . . . . . . . . . . . . . .4

Caution:
Mounting should be done by a qualified technician.  Make sure that the mounting (ceiling) area has
sufficient strength.  Read the enclosed mounting instructions thoroughly before starting. 

As of September 2004

unit: mm (inch)

(Dimensions given in inches are approximate.) 

Note: This illustration is not drawn to scale.

7.

9

1( 

0

0

5˝

)

2.

3

2( 

9

8

5˝

)

7

8.

2(

3

7˝

)

8.

6

2( 

0

8

6˝

)

650 (25.6˝)