Panasonic PT-AE100E User Manual

Power supply:

100 V–240 V ~, 50 Hz/60 Hz

Power consumption:

180 W (During standby (when fan is
stopped): Approx. 0.7 W)

Amps:

2.2 A–0.8 A

LCD panel:

Panel size (diagonal):

0.7 type (17.78 mm)

Aspect ratio:

16:9

Display method:

3 transparent LCD panels (RGB)

Drive method:

Active matrix method

Pixels:

415 272 (858 x 484) x 3 panels

Lens:

Manual zoom (1 - 1.2) / focus lens 
F 2.0 - 2.3, f 22.0 mm - 26.2 mm

Lamp:

UHM lamp (120 W)

Luminosity:

700 lm/ANSI

Scanning frequency:

(for RGB signals):

Horizontal scanning frequency: 30 kHz–70 kHz
Vertical scanning frequency:

50 Hz–87 Hz

Dot clock frequency:

100 MHz or less

YP

B

P

R

signals:

525i (480i), 625i, 525p (480p), 750p
(720p), 1125i (1080i)

Colour system:

6 (NTSC/NTSC 4.43/PAL/PAL-M/PAL-
N/SECAM)

Projection size:

1016 mm - 5080 mm (40˝ - 200˝)

Throw distance:

1.2 m - 7.4 m (3´11˝ - 24´3˝)

Optical axis shift:

17:1 (fixed)

Screen aspect ratio:

16:9

Installation:

Front/Rear/Ceiling/Desk (Menu selection
method)

Speaker:

4 cm x 3 cm oval x 1

Max. useable volume output:

2 W (mono)

Connectors

VIDEO IN:

S2 VIDEO:

Single-line, Mini DIN 4-pin
Y 1.0 V [p-p], C 0.286 V [p-p], 75 

Ω

VIDEO:

Single-line, RCA pin jack
1.0 V [p-p], 75 

Ω

AUDIO:

0.5 V [rms] RCA pin jack x 2 (L-R)

PC IN:

RGB:

Single-line D-SUB HD 15-pin (female)

R.G.B.:

0.7 V [p-p], 75 

Ω

G.SYNC:

1.0 V [p-p], 75 

Ω

HD/SYNC:

TTL high impedance, automatic
plus/minus polarity compatible

VD:

TTL high impedance, automatic
plus/minus polarity compatible

AUDIO:

Single-line 0.5 V [rms] M3 jack (Stereo
MINI)

B The battery may be weak.
B The battery may not be inserted correctly. (Refer to

page 17.)

B The remote control signal receptor on the projector

may be obstructed. (Refer to page 17.)

B The remote control unit may be out of the

operation range. (Refer to page 17.)

B The correct input signal may not be selected.

(Refer to page 22.)

B The signal format (TV system) may not be set

correctly. (Refer to page 35.)

B There may be a problem with the video tape or

other signal source.

B A signal which is not compatible with the projector

may be being input. (Refer to page 49.)

B The cable may be too long.
B The external video output for the laptop computer

may not be set correctly.
(You may be able to change the external output
settings by pressing the [Fn]+[F3] or [Fn]+[F10]
keys simultaneously. The actual method varies
depending on the type of computer, so refer to the
documentation provided with your computer for
further details.)