Panasonic PT-AE2000U User Manual

• Do not drop the remote control.
• Avoid contact with liquids or moisture.
• Use manganese batteries or alkaline batteries with the remote control.
• Do not attempt to modify or disassemble the remote control. Contact an Authorized Service Center for repairs.
• Do not keep pressing the remote control buttons as this may shorten battery life.
• Do not point the laser in other people’s eyes or stare into beam.
• See “Remote control operation” on page 22.

Switch to cycle through 
the input method. 
(page 23)

Display the LENS 
CONTROL menu and 
adjust the focus and size 
of the image. (page 25)

Turn off the power 
automatically by setting 
the duration. (page 25)

Switch to cycle through 
the aspect ratio. 
(page 23)

Switch to cycle through 
the PICTURE MODE. 
(page 25)

Display the MEMORY 
LOAD menu. (page 23)

Display the input 
waveform. (page 24)

Display the PICTURE 
menu. (page 25)

Display the COLOR 
MANAGEMENT menu. 
(page 26)

Remote control signal emitter
Remote control signal. (page 22)

Turn the button backlight 
of the remote control on/
off. (page 22)

Function buttons
Assign the frequently used functions 
from the options for shortcut. (page 39)

Learning remote control buttons and 
LCD
Program and operate other devices. 
See “Remote Control Operating Guide” 
which is provided with the projector.

Return to the previous menu. 
(page 30)

Capture the projected 
image as a still image. 
(page 22)

POWER button
While the MAIN POWER 
button is on, switch between 
stand-by mode and projection 
mode. (page 19)

Display the main menu or 
return to the previous menu. 
(page 30)

Navigate through the 
menus with FGIH, 
and activate the menu 
item with ENTER. 
(page 30)

Reset some of the settings 
to the factory default 
settings. (page 22)

Battery compartment
1. Press the tab and lift up the cover.
2. Insert the batteries according to the 

polarity diagram indicated inside.