Panasonic PT-AE2000U User Manual

J

1. Make sure the shape of 

the power plug and the 
AC IN connector on the 
back of the projector 
match, then push the plug all the way in.

2. Connect the power cord to a wall outlet.

J

1. Make sure the MAIN POWER is switched off and 

unplug the power cord from the wall outlet.

2. Hold the plug and unplug the power cord from the 

AC IN connector on the side of the projector.

• Do not use other than the provided power cord.
• Ensure all the input devices are connected and turned off before connecting the power cord.
• Do not force the connector as this may damage the projector and/or the power cord.
• Dirt or dust build-up around plugs may cause fire or electrical hazards.
• Switch off the power to the projector when not in use.

The MAIN POWER button is switched off.

The MAIN POWER button is switched on and the projector is in standby.

The POWER button is switched on and the projector is getting ready to project.

The projector is ready to project.

The POWER button is switched off and the projector is cooling the lamp.

The POWER button is switched on again when cooling the lamp and recovering to 
projection mode. Recovery may take a while.

• While the projector is cooling the lamp, do not switch the MAIN POWER button off or unplug the power cord.
• The electric consumption in standby mode is 0.08 W.

POWER indicator