Panasonic PT-AE2000U User Manual
B
asi
c Op
c Op
eration
Remote control operation
26 -
E
NGLISH
You can adjust a selected color individually
and save and retrieve under the PICTURE
MODE setting. Press the COLOR M. button
to open the menu.
and save and retrieve under the PICTURE
MODE setting. Press the COLOR M. button
to open the menu.
J
Create a new profile
Q
Adjusting the selected color
Select a color and adjust COLOR, TINT and
BRIGHTNESS.
BRIGHTNESS.
1. Select the CURSOR menu and press ENTER.
The projected image is captured, and the target
cursor is displayed.
cursor is displayed.
When the LOG is fully stored, the target cursor will
not be displayed. See “Managing stored logs” on
page 26.
not be displayed. See “Managing stored logs” on
page 26.
2. Move the cursor with F G I H to the required
place to select a color and press ENTER.
The color at the center of the target cursor is
sampled and the sample box is displayed on the left
of the cursor. The menu items are displayed on the
upper part of the screen.
sampled and the sample box is displayed on the left
of the cursor. The menu items are displayed on the
upper part of the screen.
3. Select a menu item and the I H to adjust each
item level.
The result box is displayed on the right of the cursor
and shows the adjusted color.
and shows the adjusted color.
4. Press ENTER to store the adjusted result.
“PROCESSING” is displayed for a few seconds and
the result is stored in LOG.
the result is stored in LOG.
You can store up to 8 logs under LOG for each
PICTURE MODE setting.
PICTURE MODE setting.
5. Press MENU or RETURN to return to the previous
menu.
Repeat the steps above to store more adjustment.
Q
Managing stored logs
You can edit or delete the stored logs of the
selected PICTURE MODE.
selected PICTURE MODE.
1. Select LOG and press ENTER.
The LOG menu is displayed.
2. Select the required log from 1 - 8 or ALL DELETE,
and press ENTER.
Select CHANGE to edit the log.
The cursor menu is displayed and you can readjust
the color.
the color.
Select DELETE to delete the log.
The confirmation screen will be displayed. Select OK
to delete.
to delete.
When you select ALL DELETE, the "DELETE ALL
LOG." screen is displayed. Select OK to delete all
logs. The PROFILE setting will be set to NORMAL.
LOG." screen is displayed. Select OK to delete all
logs. The PROFILE setting will be set to NORMAL.
Setting your own color profile
NORMAL
PROFILE SAVE
PROFILE DELETE
PROFILE NAME CHANGE
PROFILE DELETE
PROFILE NAME CHANGE
LOG
CURSOR
PROFILE
Target cursor
SELECT
CURSOR
RETURN
ENTER
DEFAULT
COLOR
TINT
BRIGHTNESS
Sampled color
COLOR
Adjust the vividness of the color.
Setting range: -30 to +30
Setting range: -30 to +30
TINT
Adjust the color tone.
Setting range: -30 to +30
Setting range: -30 to +30
BRIGHTNESS
Adjust the brightness of the color.
Setting range: -20 to +20
Setting range: -20 to +20
SELECT
CURSOR
RETURN
ENTER
DEFAULT
COLOR
TINT
BRIGHTNESS
Adjusted color
PICTURE MODE : CINEMA1
POINT1
POINT2
POINT3
POINT4
POINT5
POINT6
POINT7
POINT8
ALL DELETE
Sampled color
Adjusted color