Panasonic PT-VX400U User Manual

Setting

ENGLISH -

Settings

Subpicture size

Press ▲▼ to select [Subpicture size]

1 )

and then press the <SELECT> button.
Press ▲▼ to select one among the

2 )

items as below.

You can change the subpicture size among

Small, Middle and Large.

Subpicture position

Press ▲▼ to select [Subpicture

1 )

position] and then press the <SELECT>

button.
Press ▲▼ to select one among the

2 )

positions as below.

You can adjust the subpicture position. (the

bottom right, the top right, the top left and the

bottom left).

Attention

[Subpicture size] and [Subpicture position] works only

under P IN P mode.

The P IN P function is not available depending on the

input signals and the selected input terminals.

When the input signal(s) is/are incompatible, mark will

be displayed on the Main/Sub picture.

Power management

For reducing power consumption as well as

maintaining the lamp life, the Power management

function turns off the projection lamp when the

projector is not operated for a certain period.

Press ▲▼ to select [Power

1 )

management].
Press ► or the <SELECT> button to

2 )

access the submenu.

Mode

Press ▲▼ and then press the

1 )

<SELECT> button to select one mode

among the items as below.

Ready When the lamp has been fully cooled

down, the <POWER> indicator

changes to green blinking. In this

condition, the projection lamp will

be turned on if the input signal is

reconnected or any button on the

control panel or remote control is

pressed

Shut

down

When the lamp has been fully cooled

down, the power will be turned off.

Off

[Power management] function is off.

Timer

Press ▲▼ to select [Timer] and then

1 )

press the <SELECT> button.
Press ▲▼ to set the Timer(1~30min).

2 )

Direct on

Press ▲▼ to select [Direct on] and

1 )

then press the <SELECT> button.
Press ▲▼ to switch between On and

2 )

Off.

When this function is set to [On], the projector

will be automatically turned on just by

connecting the AC power cord to a wall outlet.

Be sure to turn off the projector properly. If the

projector is turned off in the incorrect sequence,

the [Direct On] function does not work properly.

Standby mode

This function can set the electric power when the

projector is standing by.

Press ▲▼ to select [Standby mode]

1 )

and then press the <SELECT> button.
Press ▲▼ to switch between the items

2 )

as below.

Eco

Restricts some functions in

standby mode to reduce power

consumption.

Network

Does not restrict functionality

even in standby mode

Note

When selecting [Network], the cooling fans may be

running depending on the temperature inside the

projector even if the projector is turned off.

Refer to "Operating Instructions - Network Operations

If Standby mode is set to [Eco], you cannot use network

functions when the projector is standing by. Also, you

cannot use some RS-232C protocol commands.

If set to [Network], you can use network functions when

the projector is standing by.