Panasonic PT-RW430UK User Manual

Chapter 4 Settings — [PROJECTOR SETUP] menu

ENGLISH - 77

Change the fan control depending on the direction of projection.
Set [COOLING CONDITION] correctly in accordance with the direction of projection referencing the following figure. Using the light source with 

incorrect settings may shorten its life.

15°

15°

15°

15°

：

30°
30°

30°
30°

[VERTICAL UP SETTING]

[FLOOR 

SETTING]

[CEILING 

SETTING]

[VERTICAL DOWN SETTING]

[PORTRAIT SETTING]

Projection direction

Frontward: Projection direction

[FLOOR SETTING]

[CEILING SETTING]

1)  Press as to select [COOLING CONDITION].
2)  Press the <ENTER> button.

 

f

The 

[COOLING CONDITION] screen is displayed.

3)  Press as to select a cooling condition.
4)  Press the <ENTER> button.
5)  When the confirmation is displayed, select [OK] or [CANCEL], and press the <ENTER> button.

Set to [ON] when using the projector at high altitudes between 1 400 m (4 593') and 2 700 m (8 858') above sea level.

1)  Press as to select [HIGH ALTITUDE MODE].
2)  Press qw to switch the item.

When using at a location lower than 1 400 m (4 593') above sea level

When using at high altitudes (between 1 400 m (4 593') and 2 700 m (8 858') above sea level)

3)  When the confirmation screen is displayed, press qw to select [OK] or [CANCEL], and press the 

 

f

The speed of the fan increases and the operation sound becomes louder when set to [ON].

A function that optimizes the light source power to suit usage conditions to reduce power consumption.

1)  Press as to select [ECO MANAGEMENT].
2)  Press the <ENTER> button.

 

f

The 

[ECO MANAGEMENT] screen is displayed.

3)  Press as to select [LIGHT POWER].
4)  Press qw to switch [LIGHT POWER].

 

f

The items will switch each time you press the button.

Sets when high luminance is required.

Reduces the power by approximately 20 % in average compared to [NORMAL] without affecting the 

brightness.