Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. PT-VW430U
  5. User Manual

Panasonic PT-VW430U User Manual

Download
Page of 100
12
 - ENGLISH
Important 
 
Information
Precautions for Use
Cautions when transporting
When transporting the projector, hold it securely by its bottom and avoid excessive vibration and impacts. 
 
z
Doing so may damage the internal parts and result in malfunctions.
Do not transport the projector with the adjustable feet extended. Doing so may damage the adjustable feet.
 
z
Cautions when installing
Do not set up the projector outdoors.
 
J
The projector is designed for indoor use only. 
 
z
Do not use under the following conditions.
 
J
Places where vibration and impacts occur such as in a car or vehicle: Doing so may damage the internal parts 
 
z
and result in malfunctions.
Near the exhaust of an air conditioner or near lights (studio lamps, etc.) where temperature changes greatly 
 
z
(Operating environment 
Æ
page 97): Doing so may shorten the life of the lamp or result in deformation of the 
outer case and malfunctions.
Near high-voltage power lines or near motors: Doing so may interfere with the operation of the projector.
 
z
Be sure to ask a specialized technician when installing the product to a 
 
J
ceiling.
This requires an optional ceiling mount bracket. 
Model No.:  ET-PKV100H (for high ceilings), ET-PKV100S (for low ceilings), 
ET-PKV200B (Projector Mount Base).
When using the projector in the elevation of below 1 200 m, make sure  
 
J
[Fan control] is set to [Off].
Failure to do so may shorten the life of the internal parts and result in malfunctions.
When using the projector in the elevation of above 1 200 m and below  
 
J
2 000m, make sure [Fan control] is set to [On 1].
Failure to do so may shorten the life of the internal parts and result in malfunctions.
When using the projector in the elevation of above 2 000 m and below  
 
J
2 700m, make sure [Fan control] is set to [On 2].
Failure to do so may shorten the life of the internal parts and result in malfunctions.
Do not install the projector at elevations of 2 700 m (8 858 ft) or higher 
 
J
above sea level.
Failure to do so may shorten the life of the internal parts and result in malfunctions.
Do not tilt the projector or place it on its side.
 
J
Do not tilt the projector body more than approximately ±30 degrees vertically or ±15 degrees horizontally. Over 
tilting may result in shortening the life of the components. 
Within +30°
Within -30°
Within +15°
Within -15°