Panasonic PT-VW430U User Manual

- ENGLISH

Preparation

Using Remote control

Installing and Removing batteries

Open the cover

1 )

Install batteries and close the cover

2 )

(Insert the – side first.)

Remove the batteries in the reverse order of

installation.

Setting Remote control ID numbers

When you use the system with multiple projectors, you can operate all the projectors simultaneously or each

projector individually using single remote control, if unique ID number is assigned to each projector.

After setting the ID number of the projector, set the same ID number to the remote control.

There are 7 different ID codes (ALL, Code 1~Code 6), the initial ID number is [ALL].

Setting the ID number

1) While holding down the <MENU> button, press the <IMAGE> button. The number of times you press

the <IMAGE> button corresponds to the desired ID code number.

2) The number of times to press the <IMAGE> button is as follows:

Code 1= Once, Code 2= Twice, Code 3= 3 times, Code 4= 4 times

Code 5= 5 times, Code 6= 6 times.

3) The ID code is changed when the <MENU> button is released.

Resetting the ID number

1) The ID code is reset to [ALL] (default) by pressing the <MENU> button and <IMAGE> button at the

same time for 5 seconds or more.

Attention

If the <IMAGE> button is pressed 7 times or more, the ID code

cannot be changed (the operation is invalid).

Note

For details, please refer to the [Remote control] of the [Setting] menu.

(

page 56)

MENU button

IMAGE button