Panasonic PT-VW430U User Manual

Read carefully the instruction manual for the device to be connected.

 

z

Turn off the power switch of the devices before connecting cables.

 

z

If any connection cable is not supplied with the device, or if no optional cable is available for connection of the 

 

z

device, prepare a necessary system connection cable to suit the device.

Video signals containing too much jitter may cause the images on the screen to randomly wobble or wafture.  

 

z

In this case, a time base corrector (TBC) must be connected.

The projector accepts the following signals: VIDEO, S-VIDEO, analogue-RGB (with TTL sync. Level) and 

 

z

digital signal.

Some computer models are not compatible with the projector.

 

z

When using long cables to connect with each of equipment to the projector, there is a possibility that the image 

 

z

will not be output correctly unless a compensator is used.

For details on what video signals the projector supports, see “List of compatible signals”. (

 

z

Æ

page 92-95)

  

When connecting with a video deck, be sure to use the one with a built-in time base corrector (TBC) or use a TBC between 

 

z

the projector and the video deck.

If nonstandard burst signals are connected, the image may be distorted. If this is the case, connect a TBC between the 

 

z

projector and the video deck.

When using an HDMI cable, check that it is compliant with the HDMI standard. Using a cable that is not compliant with the 

 

z

HDMI standard may result in problems such as the image cutting out or not appearing.  

When connecting the 1 080p signal using HDMI, use a cable compliant with 1 080p signal.

This projector does not support the Viera link (HDMI).

 

z

For the specifications of the RGB signals that can be applied from the PC, refer to “List of compatible signals”. (

 

z

Æ

page 92-95)

Computer

Audio system

Control computer

Video deck 

(TBC built-in)

Blue ray disk player with HDMI 

terminal

MIC