Panasonic PT-VW430U User Manual

Press the <

1 ) 

> button on the control panel or 

on the remote control, and 

Power off? appears 

on the screen.
Press the <

2 ) 

> button again to turn off the 

projector. The <ON(G)/STANDBY(R)> indicator 

starts to blink orange, and the cooling fans keep 

running. At this time, you can unplug the AC 

power cord even if the fans are still running.
When the projector has cooled down enough, the 

3 ) 

<ON(G)/STANDBY(R)> indicator stops blinking 

and you can turn on the projecto

r.

Do not put the projector in a case before the projector is 

 

z

cooled enough.

While the <ON(G)/STANDBY(R)> indicator is blinking, 

 

z

the lamp is being cooled down and the projector cannot 

be turned on. Wait until the <ON(G)/STANDBY(R)> 

indicator stops blinking to turn on the projector again.

The projector can be turned on after the <ON(G)/

 

z

STANDBY(R)> indicator turns red. The waiting time 

to restart will be shortened when the normal power-off 

processing for fan cooling is completed, compared with 

the time the AC power cord is immediately unplugged 

after the power off.

J

You can disconnect the power cord from the wall 

outlet or turn off the breaker even during projection 

without pressing the <

> button.

When using the Direct power Off function, you can 

 

z

not restart the projector immediately after the power is 

disconnected. The lamp remains high temperature and 

needs to be cooled, so it sometimes takes longer time 

than usual for the lamp to light up again.

Power off? disappears after 4 seconds.