Panasonic PT-RW330U User Manual

ENGLISH - 19

$WWDFKDVWUDSDFFRUGLQJWR

XVDJHFRQGLWLRQ

Flashes if any button in the remote control is pressed.

2  Power <v/b> button

Sets the projector to the standby mode when the <MAIN 

POWER> switch on the projector is set to <ON>. Also sets the 

projector in projection mode when the power is switched off 

(standby mode).

Switches the input signal to project. (x page 38)

Also used to set the ID number of the remote control and 

security password. (x page 22)

Displays the main menu. (x page 41)

Used to pause a video and mute the audio. (x page 37)

Resets the content of the sub-menu to the factory default.

(x page 42)

You can assign a frequently used operation as a shortcut button. 

(x page 39)

Sets the ID number of the remote control to use for a system 

using multiple projectors. (x page 22)

Use to simultaneously control all the projectors with one remote 

control for a system using multiple projectors. (x page 22)

Automatically adjusts the image display position while projecting 

the image.

[PROGRESS] is displayed on the screen while the image is 

adjusted automatically. (x page 38)

11  asqw buttons/<RETURN> button/<ENTER> button

Used to navigate through the menu screen.

Also used to enter a [SECURITY] password or character input.

Use to temporarily turn off the audio and video. (x page 37)

Displays the setting screen related to ECO management. 

(x page 39)

Adjusts the audio output volume. (x page 39)

 

f

Do not drop the remote control.

 

f

Avoid contact with liquids or moisture.

 

f

Do not attempt to modify or disassemble the remote control.

 

f

When attaching the strap to the remote control, hold the strap to prevent it from swinging.

 

f

The remote control can be used within a distance of about 15 m (49'2") if pointed directly at the remote control receiver. The remote control 

can control at angles of up to ±15° vertically and ±30° horizontally, but the effective control range may be reduced.

 

f

If there are any obstacles between the remote control and the remote control signal receiver, the remote control may not operate properly.

 

f

The signal will be reflected off the screen. However, the operating range may be limited from light reflection loss due to the screen material.

 

f

If the remote control signal receiver directly receives strong light, such as fluorescent light, the remote control may not operate properly. Use 

it in a place distant from the light source.

 

f

The power indicator <ON (G)/STANDBY (R)> will flash if the projector receives a remote control signal.