Panasonic PTAE7000U User Manual

Page of 104
Switching the projector on/off
28 - ENGLISH
Basic Operation
Switching the projector on/off
Power cord
Use the power cord included to prevent removal of the power cord and make sure it is fully inserted into 
the projector.
Make sure the <MAIN POWER> switch is on the <OFF> side before connecting the power cord.
Use the power cord included and ensure that it is fully inserted. 
 For power cord handling details, see “Read this first!”. (
 
pages
 
6
 
to
 
13)
Connecting
 
Fully insert until the tabs on the left 
and right make a click sound.
Disconnecting
 
Pull out while pushing on the tabs on 
the sides.
Power indicator
The power indicator indicates the power status. 
Check the status of the power indicator <ON (G) / STANDBY (R)> 
before operating the projector. 
Indicator status
Status
No illumination or flashing
Main power is switched off.
Red
Lit
Power is switched off. (Standby mode.)
Press the power <  / | > button to start projection.
* Does not operate when the lamp indicator or temperature indicator is flashing.
Flashing
Power is switched off (standby mode) and the [POWER ON LINK] is set to 
[YES] in the VIERA Link settings. 
For details about [POWER ON LINK], see [POWER ON LINK] (
 
page
 
78).
Green
Flashing
The projector is preparing to project.
Projection starts after a brief pause.
Lit
Projecting.
Orange
Lit
Preparing to switch off the power.
The power is switched off after a while. (Changes to the standby mode.)
Flashing
The power <  / | > button is switched on again in the power off preparation 
mode.
Preparing to project. Projection starts after a brief pause.
Power indicator