Panasonic PTAE7000U User Manual

60 - ENGLISH

In the European broadcasting system, if the input 

signal contains an identification signal, WSS 

automatically switches the aspect ratio to the required 

setting. (



 page 58)

Switch automatically

Do not switch automatically

Aspect ratio switches only in the case of these input 

 

z

signals: PAL/625i (576i)/625p (576p)

If the 4 edges of an image are partly dropped, you can 

use this function to adjust and project it properly.

Setting range: 0 to +10

 

z

COMPUTER signal (exc. movie based signals) is not 

 

z

supported.

If the projector is aligned non-perpendicularly to the 

screen, or if the projection screen has an angled 

surface, you can correct the keystone vertically.

Setting range: −32 to +32

 

z

You can correct the distortion ± 30 degrees from the 

 

z

vertical plane. However, if there is overcorrection, the 

image quality may deteriorate and become blurry. For a 

better quality image, installing the projector with minimum 

distortion is recommended.

When adjustment with [KEYSTONE] carried out, the 

 

z

vertical center of the screen and the lens need to be 

realigned.

The result of the keystone correction will affect the size of 

 

z

the image.

Keystone correction does not function on the menu 

 

z

screen.

Some distortion may occur due to lens shift adjustment.

 

z

The result of the keystone correction may affect the 

 

z

aspect ratio.

When a 3D signal is being input (including converting 2D 

 

z

to 3D), the [KEYSTONE] does not function.

(COMPUTER IN only)

When you select [AUTO SETUP] and then press the 

<ENTER> button, [H-POSITION], [V-POSITION], 

[DOT CLOCK], and [CLOCK PHASE] are adjusted 

automatically in accordance with the input signal.