Panasonic PT-LZ370U User Manual

Refer to “Navigating through the menu” 



 

z

After selecting the item, press ▲▼◀▶ to set.

You can switch to the desired picture mode suitable 

for the image source and the environment in which 

the projector is used.

1)  Press ▲▼ to select [PICTURE MODE].
2)  Press ◀▶ or press the <ENTER> 

▶

z

The 

[PICTURE MODE] individual adjustment 

screen is displayed.

3)  Press ◀▶ to switch [PICTURE MODE].

▶

z

The setting will change as follows each time 

you press the button.

*1:  When movie-based signals are input

*2:  When still image signals are input

[STANDARD] The picture becomes suitable for 

moving images in general.

The light output is maximized for 

use in bright areas.

[BLACKBOARD] The picture becomes suitable for 

projecting on a black board.

The picture becomes suitable for 

projecting on a white board.

The picture becomes similar to 

that of DICOM Part 14 Grayscale 

Standard.

The picture becomes suitable for 

movie sources.

The picture complies with sRGB.

*1:  Set the items other than [PICTURE MODE] to the factory 

default.

 

z

The factory default picture modes are [DYNAMIC] 

for still image input signals and [STANDARD] for 

movie-based input signals.

 

z

DICOM, the abbreviation of “Digital Imaging and 

Communication in Medicine”, is a standard for 

medical imaging technology. Although the name 

DICOM is used in the setting item, this projector 

is not for a medical use. Do not use the projected 

images for diagnostic purposes.

You can adjust the contrast of the colors.

1)  Press ▲▼ to select [CONTRAST].
2)  Press ◀▶ or press the <ENTER> 

▶

z

The 

[CONTRAST] individual adjustment screen 

is displayed.

3)  Press ◀▶ to adjust the level.

Press ▶ .

Brightens the 

screen and makes 

the color of image 

deeper.

Maximum 

value +64

Press ◀ .

Darkens the screen 

and makes the 

color of image 

lighter.

Minimum 

value -64

 

z

Adjust [BRIGHTNESS] first when you need to 

adjust [BRIGHTNESS] and [CONTRAST].