Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. PT-LZ370U
  5. User Manual

Panasonic PT-LZ370U User Manual

Download
Page of 122
[SECURITY] menu
ENGLISH - 75
Settings
[SECURITY] menu
Select [SECURITY] from the main menu, and 
select the item from the sub-menu.
Refer to “Navigating through the menu” 
(
 page 44) for the operation of the menu 
screen.
 
z
When the projector is used for the first time
Initial password: Press ▲▶▼◀▲▶▼◀ in 
order, and press the <ENTER> button.
 
z
After selecting the item, press ▲▼◀▶ to set.
Attention
 
z
Make the settings after displaying the 
[SECURITY] 
screen.
 
z
When the 
[SECURITY] screen is displayed, 
entering a password is required. Enter the set 
password and then continue operations.
 
z
When the password has been changed previously, 
enter the changed password, and press the 
<ENTER> button.
Note
 
z
The entered password is displayed with * mark on 
the screen.
[PASSWORD]
You can set to display the security password entry 
screen when the projection starts. If the correct 
password is not entered, any operation other than the 
power 
 button operations becomes unavailable.
1)  Press ▲▼ to select [PASSWORD].
2)  Press ◀▶ to switch [PASSWORD].
▶
z
The setting will change as follows each time 
you press the button.
[OFF]
[ON]
[OFF]
Disables the security password 
entry.
[ON]
Enables the security password 
entry.
Note
 
z
The [PASSWORD] is set to [OFF] by default and 
after you perform initialization.
 
z
Change the password periodically that is hard to 
guess.
 
z
The security password will be enabled after setting 
[PASSWORD] to [ON] and turning off the power 
(standby mode).
[PASSWORD CHANGE]
You can change the security password.
1)  Press ▲▼ to select [PASSWORD 
CHANGE].
2)  Press the <ENTER> button.
▶
z
The 
[PASSWORD CHANGE] screen is 
displayed.
3)  Press ▲▼◀▶ and number (<1> - <6>) 
buttons to set the password.
▶
z
Up to eight button operations can be set.
4)  Press the <ENTER> button.
5)  Re-enter the password for the 
confirmation.
6)  Press the <ENTER> button.
Note
 
z
The entered password is displayed with * mark on 
the screen.
 
z
An error message is displayed on the screen when 
the entered password is incorrect. Re-enter the 
correct password.
 
z
When numerals are used in the security password, 
initialization of the security password will be 
necessary if the remote control is lost. For the 
method of initialization, consult your dealer.