Panasonic PTEX16KU User Manual
7
NETWORK menu (continued)
Network setup
You can make detailed wired LAN settings.
Press ▲▼ to select [Network setup], and press <SELECT> button.
1
The detailed [Network setup] screen will be displayed.
Press ▲▼ to select an item, and change the setting according to the instructions.
2
DHCP
(DHCP client function)
On:
If a DHCP server exists in the network to which the
projector is connected, the IP address will automatically be
acquired.
Off:
If a DHCP server does not exist in the network to which
the projector is connected, additionally set [IP address
],
[Subnet mask
] and [Default gateway
].
IP address
(Display of IP address and setting)
Enter the IP address if DHCP server is not used.
Subnet mask
(Displaying and setting the subnet mask)
If not using a DHCP server, enter the subnet mask.
Default gateway
(Display of gateway address and setting)
Enter the gateway address if DHCP server is not used.
DNS
Sets IP address of the DNS server.
“Glossary” (See page 26)
Press ▲▼◄► to select [Set], and press <SELECT> button.
3
Save the current network settings.
Before using the DHCP server, make sure the DHCP server is already functioning.
For details of IP address, subnet mask, gateway and DNS, ask the network administrator.
For details of IP address, subnet mask, gateway and DNS, ask the network administrator.
Default wired LAN settings
The following settings are set before the projector leaves the factory.
DHCP
Off
IP address
192.168.10.100
Subnet mask
255.255.255.0
Default gateway
192.168.10.1
DNS 1
DNS 2
DNS 2