Panasonic PT-VX415NZU User Manual

If a problem should occur inside the projector, the <LAMP> and/or <WARNING> indicators will inform you. Manage the 

indicated problems as follow.

Before you take a remedial measure, follow the procedure of switching the power off indicated in “Powering Off the 

 

f

projector”. (

Æ

 page 43)

Lighting in red.

Blinking in red.

Time to replace the lamp unit.  

(

Æ

 page 118)

A problem is detected in the lamp or the power supply for the 

lamp.

Was [REPLACE LAMP] displayed 

 

f

when you turned on the power?

The indicator lights up when the 

 

f

runtime of the lamp unit has reached 

4 000 hours (when [LAMP POWER] is 

set to [NORMAL]).

Have you turned on the 

 

f

power again immediately 

after turning it off?

Some error has occurred in 

 

f

the lamp circuit. Check for 

fluctuation (or drop) in the 

source voltage.

Replace the lamp unit.

 

f

Wait a while until the 

 

f

luminous lamp cools off, 

and then turn on the power.

Turn off the projector, and 

 

f

unplug the AC power cord, 

and consult your dealer.

Contact your dealer for repair services when <LAMP> indicator persists to light and blink after taking these measurements.

 

f

Lighting in red.

Blinking in red.

Blinking in red. (Slow)

Internal temperature is high (warning).

Internal temperature is high 

(standby status).

The projector detects an 

abnormal condition and 

cannot be turned on.

Is the air intake/exhaust port blocked?

 

f

Is the room temperature high?

 

f

Is the air filter unit clogged?

 

f

 _

Remove any objects that are blocking the air intake/ exhaust port.

 

f

Install the projector in a location with an ambient temperature of 0 °C 

 

f

(32 °F) to 40 °C (104 °F)

Do not use the projector at high altitudes of 2 700 m (8 858') or higher 

 

f

above sea level.

Replace the air filter unit. (

 

f

Æ

 page 116)

If the projector is turned off 

 

f

again, unplug the AC power 

cord and contact the dealer 

or the service center for 

service and checkup.

Contact your dealer for repair services when <WARNING> indicator persists to light and blink after taking these 

 

f

measurements.

<LAMP> indicator

<WARNING> indicator

ENGLISH - 115