Panasonic PT-VX415NZU User Manual
[PICTURE] menu
On the menu screen, select [PICTURE] from the main menu, and select an item from the submenu.
Refer to "Navigating through the menu" (
Æ
page 54) for the operation of the menu screen.
After selecting the item, press
f
asqw
to set.
[PICTURE MODE]
You can switch to the desired picture mode suitable for the image source and the environment in which the projector is used.
Press
1)
as
to select [PICTURE MODE].
Press
2)
qw
or the <ENTER> button.
The [PICTURE MODE] individual adjustment screen is displayed.
f
Press
3)
qw
to switch the item.
The items will switch each time you press the button.
f
[STANDARD]
The picture becomes suitable for moving images in general.
[DYNAMIC]
The light output is maximized for use in bright areas.
[BLACKBOARD] The picture becomes suitable for projecting on a black board.
[WHITE BOARD] The picture becomes suitable for projecting on a white board.
[WHITE BOARD] The picture becomes suitable for projecting on a white board.
[CINEMA]*
1
The picture becomes suitable for movie sources.
[NATURAL]*
2
The picture complies with sRGB.
[EASY SETTING]*
3
When executing the EASY SETTING function, it will be the optimal hue for the projected image
according to the projection environment.*
4
Only for the movie-based signals.
*1
Only for the still image signals.
*2
When the projector leaves the factory, [EASY SETTING] does not appear. When execute the EASY SETTING function
*3
by setting [COLORBOARD] to [ON] in [EASY SETTING], [EASY SETTING] is added to the items.
If you use the projector in different environment, the screen may change. Please execute the EASY SETTING function
*4
again by setting [COLORBOARD] to [ON] in [EASY SETTING].
Note
The factory default picture mode is [DYNAMIC] for still image input signals and [STANDARD] for movie-based input signals.
f
[EASY SETTING] will not be displayed when leaves the factory. It will be displayed when executed the adjustment of
f
[COLORBOARD] in the [EASY SETTING].
sRGB is an international standard (IEC61966-2-1) for color reproduction defined by IEC (International Electrotechnical
f
Commission).
[CONTRAST]
You can adjust the contrast of the colors.
Press
1)
as
to select [CONTRAST].
Press
2)
qw
or the <ENTER> button.
The [CONTRAST] individual adjustment screen is displayed.
f
Press
3)
qw
to adjust the level.
Operation
Adjustment
Adjustment range
Press the w button. Brightens the screen and makes the color deeper.
-32 ~ +32
Press the q button. Darkens the screen and makes the color lighter.
Attention
Adjust [BRIGHTNESS] first when you need to adjust [BRIGHTNESS] and [CONTRAST].
f
58 - ENGLISH
Chapter 4 Settings - [PICTURE] menu