Panasonic PT-VX415NZU User Manual
[CONTROL DEVICE SETUP]
Enable/disable the button operations on the control panel and the remote control.
Press
1)
as
to select [CONTROL DEVICE SETUP].
Press the <ENTER> button.
2)
The [CONTROL DEVICE SETUP] screen is displayed.
f
Press
3)
as
to select one item between [CONTROL PANEL] and [REMOTE CONTROLLER].
[CONTROL PANEL]
You can set the limitation on the control from the control panel.
[REMOTE CONTROLLER] You can set the limitation on the control from the remote control.
Press
4)
qw
to switch between [ENABLE] and [DISABLE].
You can set the limitation on the control from the control panel or the remote control.
f
[ENABLE]
Enable the button operations.
[DISABLE]
Disable the button operations.
A confirmation screen will be displayed when you change [ENABLE] to [DISABLE].
f
Press
5)
qw
to select [OK], and then press the <ENTER> button.
Note
When a button operation is performed on the device set to [DISABLE] , the [PASSWORD] screen is displayed.
f
To continue operations, enter the security password.
The [PASSWORD] screen will disappear when there is no operation for approx. 10 seconds.
f
If the operations of both [CONTROL PANEL] and [REMOTE CONTROLLER] are set to [DISABLE], the projector cannot be
f
turned off (cannot enter standby).
Even when you set button operations on the remote control to be disabled, operations of the <ID ALL> and <ID SET>
f
buttons on the remote control are enabled.
84 - ENGLISH
Chapter 4 Settings - [SECURITY] menu