Panasonic PT-VX501U User Manual

Complete peripheral connections (with a 

1 ) 

computer, VCR, etc.) before turning on the 

projector.
Connect the projector’s AC power cord into an 

2 ) 

AC outlet. The <ON(G)/STANDBY(R)> indicator 

lights red. Open the lens cap.
Press the <

3 ) 

> button to on the control 

panel or on the remote control. The <ON(G)/

STANDBY(R)> indicator lights green and the 

cooling fans start to operate. The preparation 

display appears on the screen and the count 

down starts.
After the countdown, the input source that was 

4 ) 

selected the last time and the lamp power status 

icon appear on the screen.
If there is no signal input when start on the 

5 ) 

projector, or the current signal is missed while 

operating the projector, the Video/Computer 

selection window will be displayed on the screen, 

please move the pointer to input source desired 

by pressing the ▲▼ and the <ENTER> button. 

And then follow the input signal guidance window 

to correct the signal and connection.

         If the projector is locked with a PIN code, PIN  

code input dialog box will appear. Enter the PIN 

code as instructed on the next page.

When the [Logo select] function is set to [Off], the logo 

 

z

will not be shown on the screen (

Æ

page 53).

When [Countdown off] or [Off] is selected in the [Display] 

 

z

function, the preparation display will not be shown on the 

screen (

Æ

page 53).

 When the [Input search] function is set to [On 2], the 

 

z

input signal will be searched automatically (

Æ

page 52).

When the [Direct on] function is set to [On], the projector 

 

z

will be turned on automatically by connecting the AC 

power cord to an AC outlet.

(2)

(3)

(3)

06

The preparation display will disappear 

after 30 seconds

.