Panasonic PTVX410ZU User Manual

The ON(G)/STANDBY(R) indicator informs you the status of the power. Confirm the status of the <ON(G)/STANDBY(R)> 

indicator before operating the projector.

ON(G)/STANDBY(R) indicator

Off

The power cord is unplugged.

Red

Lit

The power cord is plugged.

The [STANDBY MODE] is set to [ECO] when the projector is in standby mode and the 

cooling is completed. 

Blinking

The power is switched off (in standby mode). The [STANDBY MODE] is set to [NETWORK].

*

1

The power is switched off (in standby mode). The [STANDBY MODE] is set to [NORMAL].

*

2

Orange

Lit

The projector is cooling down. The power is switched off after a while. (Changes to the 

standby mode.)

Green

Lit

Projecting.

Blinking

The power is on and the lamp is not working. The [POWER MANAGEMENT] is set to [READY].

*

3

The lamp starts work.

*

4

 The projector will project image after a while.

*1: The indicator will light as the following order:

2.75 seconds (light) → 0.25 seconds (off) → 0.75 seconds (light) → 0.25 seconds (off)

*2: The indicator will light as the following order:

2.75 seconds (light) → 0.25 seconds (off)

*3: The indicator will light as the following order:

2.0 seconds (light) → 2.0 seconds (off)

*4: The indicator will light as the following order:

0.5 seconds (light) → 0.5 seconds (off)

ENGLISH - 35