Nokia 110S User Manual

GB 6

Connecting the Mediamaster

Common connections

In this section, you will see some of the most common ways to
connect your equipment.

If you have problems with your connections and need help, contact
your retailer or Nokia Support.

Connecting to the TV

• Connect the cable from the satellite antenna to the Antenna

input on the Mediamaster.

• Connect the ordinary terrestrial TV antenna to the TV antenna

input.

• Connect a SCART cable between the main SCART socket

on the TV and the TV SCART socket on the Mediamaster.

• Switch on your TV, then plug in and switch on your Mediamaster.

You may need to select the AV (SCART) channel on your TV to
watch digital TV. In some cases, your TV will automatically
select this channel when the Mediamaster is switched on.

It is always advisable to consult the user guide that came
with your TV.

Connecting a Video recorder

• Connect the ordinary TV antenna to the TV antenna input socket

on the Video.

• Connect an RF cable from the TV/VCR output on the Video to the

antenna input socket on the TV.

• Connect a SCART cable between the main SCART socket on the TV

and the TV SCART socket on the Video.

• Connect a SCART cable between the SCART socket on the video

and the SCART socket on the Mediamaster.

• Switch on your TV, then plug in and switch on your Mediamaster.

• There should be an AV select button on your Video. This should

be selected to record digital TV.

You may need to select the AV (SCART) channel on your TV.
In some cases, your TV will automatically select this channel
when the Mediamaster is switched on.

NOTE: In this set-up, your Video has to be on or in standby
mode to watch digital TV. To record a digital channel, you will
need to select the AV (SCART) channel on your Video.

It is always advisable to consult the user guides for your
Video and TV.