NEC NP-M352WS User Manual

106

5. Using On-Screen Menu

Setting up the Projector for a Wired LAN Connection [WIRED LAN]

Important

• Consult with your network administrator about these settings.
• When using a wired LAN connection, connect a LAN cable (Ethernet cable) to the LAN port (RJ-45) of the projec-

tor. (

→ page

123

)

TIP: The network settings you make will not be affected even when [RESET] is done from the menu.

[WIRED LAN]

[DISABLE]

Wired LAN connection will be turned off.

[ENABLE]

Wired LAN connection will be turned on.

[SETTINGS]

[DHCP]

ON �� IP address, subnet mask, and gateway will

be automatically assigned to the projector

from your DHCP server�

OFF �� Specify IP address, subnet mask, and gate-

way assigned by your network administra-

tor�

[IP ADDRESS]

Set your IP address of the network connected to the
projector.

[SUBNET MASK]

Set your subnet mask number of the network connected
to the projector.

[GATEWAY]

Set the default gateway of the network connected to the
projector.

[AUTO DNS]

ON �� DHCP server will automatically assign IP

address of DNS server connected to the

projector�

OFF �� Set your IP address of DNS server connected

to the projector�

[RECONNECT]

Retry to connect the projector to a network.