NEC NP-M282X User Manual
26
2. Projecting an Image (Basic Operation)
[M402W/M362W/M322W/M402X/M362X/M322X/M282X]
1. Press the
▼ (
) button on the projector cabinet
with no menus displayed.
The Keystone screen will be displayed on the screen.
• Press the KEYSTONE button when using the remote
control.
2. Press the
▼ button to select [VERTICAL] and then
use the
◀ or ▶ so that the left and right sides of the
projected image are parallel.
* Adjust the vertical keystone distortion.
* Adjust the vertical keystone distortion.
Projected area
Screen frame
3. Align the left (or right) side of the screen with the
left (or right) side of the projected image.
• Use the shorter side of the projected image as the
• Use the shorter side of the projected image as the
base.
• In the right example, use the left side as the base.
Align left side
4. Press the
▲ button to select [HORIZONTAL] and then
use the
◀ or ▶ so that the top and bottom sides of
the projected image are parallel.
• Adjust the horizontal keystone distortion.
• Adjust the horizontal keystone distortion.
5. Repeat steps 2 and 4 to correct keystone distor-
tion.