NEC XG135LC User Manual

20

To adjust the picture for each input, proceed as follows:

NOTE: The color, sharpness, and tint controls are not selected in
the “PICTURE” menu for RGB signal. The tint control is not
selected in the “PICTURE” menu for SECAM/PAL signal.

1 Press the OPERATE button.

• The “OPERATE” menu is displayed.

2 Use the CURSOR

or

button to highlight the “1/PICTURE”

line and press ENTER to display the “PICTURE” menu. You can

also select the “PICTURE” menu directly by pressing the INPUT

“1” button.

3 Use the CURSOR

or

button to select a picture function and

then press ENTER. You can also select an item directly by

pressing the corresponding number button.

• The picture adjustment screen will be displayed.

Items to select:
• BRIGHT (Brightness control)

• CONTRAST (Contrast control)
• COLOR (Color intensity control)
• SHARPNESS (Picture detail control)
• TINT (Red and green values control)

NOTE: When you are in the BRIGHT adjustment mode, all the
CRTs will be in use. The CRT beam cannot be cut-off.

4 Use the CURSOR buttons to adjust a picture to your preference.

• The CURSOR

or

button increases the level.

  The CURSOR

or

button decreases the level.

5 To end this adjustment, press the END button.

• Wherever the END button is pressed, the screen changes in this

order:

“PICTURE” menu 

→

 ”OPERATE” menu 

→

 Source screen