NEC VT465 User Manual

Ventilation (outlet)
Heated air is exhausted from here

* This security slot supports the MicroSaver

®

 Security System. MicroSaver

®

 is a registered trademark of Kensington Microware Inc. The logo is

trademarked and owned by Kensington Microware Inc.

Built-in Security Slot (   )*

Adjustable Tilt Foot Lever
(See page E-18)

Remote Sensor (See page E-10)

Controls (See page E-7)

Ventilation (inlet) / Filter Cover

Lens Cap

Lens

Adjustable Tilt Foot (See page E-18)

AC Input
Connect the supplied power cable's two-
pin plug here, and plug the other end into
an active wall outlet. (See page E-16)

Main Power Switch
When you plug the supplied power cable into
an active wall outlet and turn on the Main
Power switch, the POWER indicator turns
orange and the projector is in standby mode.
(See page E-17)

Remote Sensor
(See page E-10)

Lamp Cover (See page E-30)

Lamp Cover Screw

Adjustable Tilt Foot Lever
(See page E-18)

Adjustable Tilt Foot
(See page E-18)

Focus Ring

Zoom Lever

Monaural Speaker (1W)

You can carry the projector by attaching the supplied carrying handle
securely to the projector.
To attach the supplied carrying handle, use the supplied flathead screw-
driver and two screws.
Place a soft cloth on the working surface before turning the projector
over to prevent scratching the top cover. Make sure that the carrying
handle is attached with correct orientation as shown below.