NEC NP-VE281 User Manual
16
2. Installation and Connections
Connecting the Supplied Power Cord
Connect the supplied power cord to the projector.
First connect the supplied power cord's three-pin plug to the AC IN of the projector, and then connect the other plug
of the supplied power cord in the wall outlet.
First connect the supplied power cord's three-pin plug to the AC IN of the projector, and then connect the other plug
of the supplied power cord in the wall outlet.
To wall outlet
The projector will go into standby
mode. When in standby mode, the
POWER indicator will light orange
and the STATUS indicator will light
green when [NETWORK STANDBY]
is selected for [STANDBY MODE].
mode. When in standby mode, the
POWER indicator will light orange
and the STATUS indicator will light
green when [NETWORK STANDBY]
is selected for [STANDBY MODE].
CAUTION:
Parts of the projector may become temporarily heated if the projector is turned off with the POWER button or if
the AC power supply is disconnected during normal projector operation.
Use caution when picking up the projector.
the AC power supply is disconnected during normal projector operation.
Use caution when picking up the projector.
Make sure that the prongs are fully inserted into both the
power plug and the wall outlet.
power plug and the wall outlet.